Nine Processes for Making High-end Paint Display Cabinet

First, blanking shaping: according to the construction drawings, the sheets and so on are cut, and then nailed into shape;

2. Moisture-proof treatment: In order to prevent the paint from bulging, moisture-proof treatment should be done at the place where the paint needs to be done first.

3. Repair treatment: repair cracks, incomplete, nail eyes, to repair materials dry and then grind, such as repair effect is not ideal, need to repair the second, third;

4. Full scraping putty: Full scraping putty in places where paint is needed, and polishing after putty is thoroughly dried. Higher requirements of display cabinets generally make putty three times;

Fifth, primer treatment: spray primer, dry after polishing, primer number of times and the quality requirements of display cabinet, cosmetics display cabinet generally do six times primer;

6. Topcoat treatment: spray topcoat, dry after polishing, high-quality display cabinets generally need three times topcoat;

7. Paint baking: After spraying finish paint, bake at constant temperature according to the set temperature and time. If the temperature is too low, baking is also necessary in the process of putty and primer.

8. Paint airing treatment: After baking, it can not be shipped immediately, and it takes a certain time to aire the paint before shipment.

9. Factory assembly: The reason why it is called factory production is that the display cabinet is assembled into seven or eight pieces in the factory. What can be done in the factory is never done on site, which improves efficiency and guarantees quality.

This is the end of the introduction of the nine processes for the production of high-end paint display cabinets. Funroad Commercial Show is looking forward to cooperating with you.